We will be coming out of the top of the panel with 6/3 aluminum SER. Running up, over, and down the garage wall. We’ll be popping out next to the A/C EMT run into a WR R3 junction box. From there we’ll be converting it to #8 THHN copper, then running it in 3/4 EMT. At the corner of the house we’ll LB into the 50amp spa disconnect. We’ll come out the bottom of the disconnect with 3/4 EMT to the spa, then converting it to liquid tight and connecting to the control panel. We will be installing a light over the stairs. A 10 FT ladder will be needed The out let in the hallway needs to swapped out because cords fallout.