Overall Experience
Quality
Price
Convenience
Knowledgeable, competent and thorough. Answered all questions completely and in appropriate terms for a layman.
Overall Experience
Quality
Price
Convenience
Excellent and professional as always. Justin remains a great representative of your company.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Justin Sanford is a professionals professional. I wish all my projects would go so smooth.
Overall Experience
Quality
Price
Convenience
Excellent a Work. Justin is an all star and will use again!
Overall Experience
Quality
Price
Convenience
Complete the follow work below: Correct the issues inside the main panel and sub-panels by moving breakers to the correct locations and install UL approved types. Install a full home surge protection inside the main panel and at the sub-panel in the garage From the main panel inside install a new 6/3 NM-B cable to outside of the home for the de attached garage. Install a weatherproof junction box and convent to an outdoor rated wire. Have a directional bore team come out and install a new conduit underground from the home to the left side of the garage. Install a new 60 amp Nema 3 disconnect on the left side of the garage Install a new grounding system per code Install a #6 wire for the car charger and install a new 40 amp 240 v breaker and commission the unit for 30 amps. Replace failing breaker
We came out today because the customer had concerns about his detached garage having power loss. After an agree to the diagnosis we found that in the sub-panel located in the basement has a 30 amp feed going to the garage. The wire is a UF multiwire branch circuit. This wire is then fed under ground and goes to a 60 amp non fused disconnect on the left side of the garage then goes sub-panel in the garage. The garage has a Tesla wall charger installed on the left hand side. The Tesla has a 30 amp breaker and a 10/3 UF wire feeding it. After removing then disconnects cover I tried to pull the fuse out and it was welded. The wires are also burnt up as well. The customer stated that he has the unit set for 30 amp draw which could resulted in the burn or this was due to loose connections. For today we replaced the disconnect with a new one and informed the homeowner to set the charging between 15 or 20 amps. The sub- panel in the garage has (3) breakers that are not approved for the manu