Definitely would request Elijah to come back and work anytime
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Jacob is knowledgeable, professional and friendly. It was a pleasure working with him.
Overall Experience
Quality
Price
Convenience
I will like to say thank you to Jordan Nelson for the excellent and professional service he provided me. Excellent performance and a great person!
Overall Experience
Quality
Price
Convenience
I can always count on Ben for the type of service new
Overall Experience
Quality
Price
Convenience
Our Tech guy was friendly & yet professional. He explained everything after his thorough inspection & gave us a complete report on how our system was working.
Overall Experience
Quality
Price
Convenience
Myles could not have done a better job! He deserves a raise!!
Overall Experience
Quality
Price
Convenience
Again, excellent service provided by Ben. He identified and fixed our generator immediately. I wish all repairmen were like Ben.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Bruno arrived on time, professional, courteous, didn’t try to upsell unnecessary services and fixed all of the problems quickly. I will use TE Certified Electrical, Plumbing again in the future!
Overall Experience
Quality
Price
Convenience
Technician was friendly and professional. Explained everything and answered all my questions.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Jesus is Friendly, Courteous, professional, knowledgeable, answered questions and completed services as requested. I highly recommend Jesus!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Install new Rheem select heat pump system for basement Install new supply and return plenum Install new supply lines and new return lines Mastic seal equipment connections Install new 50ft Lineset drain line and condensation pump Install new thermostat wire and customer provided thermostat Install new outdoor pad and electrical disconnect Install all new boots and registers System start up
Customer had a main line blockage that was affecting the entire upstairs bathroom group, customer recently moved in the second blockage that affected the entire upstairs had the septic tank pumped not too long ago, I pulled the toilet upstairs and ran my cable down the main line to clear the blockage after I ran my cable I was able to poke free. The blockage on all the water was draining after testing. All the water is flowing perfectly scheduled for a camera inspection since it’s the second time affecting the upstairs and they will run the camera from the same toilet I pulled. I did not set the toilet all the way back recommend that the customer do not use the toilet until inspection is completed. Customer do have another bathroom upstairs that they can use. I have the toilet over the flange and bolted to the floor, but no water is connected to make it easier for the camera tech to pull the toilet.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.
On arrival, it was explained that the water bill had increased. The water company says there is a steady 8 gallons an hour being used. upon investigation, we discovered 100 psi inside the home and no thermal expansion protection. After much investigating the only thing that could be determined at this time was due to the high pressure the master bedroom toilet fill valve had failed. After providing options upon approval, we replaced the pressure regulator, added a thermal expansion tank properly, mounted to the structure of the home and rebuilt the master bedroom toilet. we also replaced the isolation valve for the water heater and re-ran the piping on the cold side going to the water heater in order to get rid of a few inches of polybutylene. We also installed a new whole home shut off valve. Tested everything for leaks and proper function.