Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
David was courteous and professional. He identified the problem the sprinkler was having and promptly fixed it. Checked all zones to ensure they were working.
Overall Experience
Quality
Price
Convenience
Marco was very professional and thorough. He was able to pinpoint the issues and correct them and no time at all.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
These two guys came, found the leak I had, gave me an estimate, and had it fixed in less than 30 minutes. They also fixed a sprinkler head that was affected by the leak for free. They were polite and professional in all aspects. I definitely would use these guys again.
Overall Experience
Quality
Price
Convenience
It was a great experience. Very professional. Prompt. Technicians kept me informed as to what was taking place with the repairs.
Overall Experience
Quality
Price
Convenience
Staff did a great job very polite and knowledgeable.! I would highly recommend Andy’s !
Overall Experience
Quality
Price
Convenience
Good work, good attention to detail. Explanations were clear and complete.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Our outdated controller finally died. Danny and his team was able to replace it the same day, give me a quick tutorial and made sure I was comfortable working it before he left. This is why we are lifelong customers.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Arthur “Jr.” and Lucio are on time. Did the diagnostics very well and found the problems. Work on it and now everything is running good. Both technicians know what they are doing and very patient.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Has several drip leaks and 1 leak heads 2 that stay up after system turned off and 1 low head
Replace 2 head on zone 2 along with valve for zone 4
Repaired leak on zone 6 flower bed and added 2 heads
We came to replace the control because it had burned the garage down so we saw the cable had been run from the outside where a deck is to the inside garage we replaced the controller and saw nothing gave ohms and it also didn’t give any ohms where we extended the wires we started investigating with the locator and we saw there was an issue under the deck in the back yard we talked to Aaron and he said he didn’t want to lift any of the wood up because he didn’t want to be responsible if it got damaged. So he told us to run it on top of the deck so we did reconnect it and we saw some valves weren’t getting any power. We then turned the DCA on and we immediately saw that there was a couple valves that were stuck open. We were going through the system and some would turn on and off but nothing would get good pressure because of the valves that were stuck open we turned off the water and let Aaron know that we were gonna turn it off because if we left it on those zones wouldn’t turn off. We
Customer said there water puddling in the yard upon inspection there is a small hairline crack in the valve connection.
Customer called and thought he had a valve issue however upon inspection it was found he actually had a broken head, it was replaced with a 30” riser.
The customers has two low heads, two leaking nozzles, and a rotor that needs to be moved out in the yard from behind a tree.
Changed valve for zone 2
Changed valve for zone 2
Added head on zone 4 and fixed a lateral leak. Also changed 2 nozzles along with investigating a main line leak.
We came to check the system because the drip lines and the lights weren’t working so we checked the system and we saw the drip lines weren’t working properly because there was a line cut so we reconnected it and the lines filled up perfectly fine. So we checked the system and saw various heads that were high or low and 1 more drip leaks so we let the customer know and she said she only wanted to do the drip leaks and the fix the lights we started investigating the light issue and saw the cable had been cut in different areas and some connections also weren’t done properly. We then manually turned it on from the control and they all turned on.
1 nozzle broke off on zone 1 and the other one was clogged on zone 7 near mailbox.
Change 12 heads into 6 inch pop up around the property due to them being too low or right at grass level.
Couple of broken heads and couple of low heads
2leaking rotors and 3 low heads