I was very impressed with the quick action taken and the level of expertise that Curtis demonstrated. I will definite recommend this company and will use them again in future.
Overall Experience
Quality
Price
Convenience
Upon inspection of Nest thermostat found to be flashing low battery. Removed thermostat from the wall and found to only have 4 wires installed. Went into attic and wired in a common wire for thermostat and check unit for 24 volt power. Found unit in attic to be ok at this time. Went to thermostat and added the common wire and installed the thermostat back on the wall. At this time thermostat is operating under manual mode due to no internet connection and low battery flash. 30 day labor warranty.
Replaced 13 angle stops and supply line throughout the home. Master bathroom replaced both left and right sink angle stop and supply lines as well as toilet flapper. Guest bathroom (next to laundry) replaced both angle stops and supply lines. Hall bathroom replaced angle stops and supply lines for pedestal sink. And finally in Jack and Jill bathroom replaced toilet angle stop and supply lines and both sinks angle stops and lines. Turned on water checked for leaks. None present. 5 year warranty on labor.
Upon arrival found toilet handle that was installed hitting the top of the lid and the toilet was still running due to an old fill valve and flapper. Replaced the fill valve and flapper, as soon as the new fill valve was installed one piece angle stop leaked and needed to be replaced. Replace angle stop and supply line. No leaks checked toilet for constant running no issues present.
Remove old toto trip lever Install new toto trip lever Remove old 1 1/4 pressure regulator Install new 1 1/4 pressure regulator Test both new installs Set pressure to approved rating 60 psi
Arrived on property to burst new kitchen line. See estimate for entire process. Once new line was installed I then tested drain system to ensure proper function. Everything is now draining properly.
Found tub to be backing up. Ran machine out to clear tub. Tested to ensure proper function. Everything is working properly at this time.
Arrived on property for toilet issues. Found the existing toilets to be broken at the tanks and currently leaking. They will need to be replaced to properly function. First water was shut off at the fixture and existing toilet removed. Then wax was removed and inspection of flange was performed. Then new Koehler toilet was assembled and installed. Once install was complete I then tested both new toilets for proper function. Both toilets are now working properly at this time with no leaks.
Estimate to install 2 customer supplied faucets and pop up drains. Will remove and dispose of old faucets and drains. Install 2 new Hans Ghroe faucets and pop up drains. Will install and provide new Ptraps.
Go back after cut and dry were out and the construction was finished. Put on two dual angle stops hot and cold
