6399 Jimmy Carter Blvd
Norcross, GA 30071
6784918361

Job Locations
for powder springs, ga


Map of Powder Springs GA
Eric V.

Eric V.


Job Checkin

Homemade states that they attempt to reset and unjam the garbage disposal but were unsuccessful and called us to come and fix the issue. Upon arrival I greeted homeowners and they showed me the kitchen sink and the garbage disposal would just hum but not turn. I attempted to unjam it but it was not stuck it wouldn’t turn so I recommended replacing the unit which homeowner agreed to and I did my inspection. Also found that the pressure was high and the expansion tank was blown internally. They were hesitant at first but when I was half way thru installing the garbage disposal they opted to replace the PRV. Once I fully installed the garbage disposal and test it, it works properly no leaks or issues and I moved on to shut off the water and removed the old shut off and PRV. I then installed a new PRV and ball valve shut off and pressed it in place and tested the connections. Once I was done I turned on the water and checked for leaks which non were found or issues and I adjusted the press

Homemade states that they attempt to reset and unjam the garbage disposal but were unsuccessful and called us to come and fix the issue. Upon arrival I greeted homeowners and they showed me the kitchen sink and the garbage disposal would just hum but not turn. I attempted to unjam it but it was not stuck it wouldn’t turn so I recommended replacing the unit which homeowner agreed to and I did my inspection. Also found that the pressure was high and the expansion tank was blown internally. They were hesitant at first but when I was half way thru installing the garbage disposal they opted to replace the PRV. Once I fully installed the garbage disposal and test it, it works properly no leaks or issues and I moved on to shut off the water and removed the old shut off and PRV. I then installed a new PRV and ball valve shut off and pressed it in place and tested the connections. Once I was done I turned on the water and checked for leaks which non were found or issues and I adjusted the press