PELLET STOVE MAINTENANCE 1st visit • Cleaned unit from soot and debris • Pulled the refractories and cleared the combustion chamber • Cleaned off the fan activation sensor • Pulled the exhaust fan, and inspected • Cleaned the exhaust fan assembly • Cleaned the exhaust fan blades • Cleaned the convection fan • Inspected the circuit board and fuses • Inspected all wire connections • Inspected the pressure switch • Cleared the pressure ports • Inspected the auger motor • Wiped down and cleaned behind the unit • Cleared the burn pot from burned pellet build up • Cleared the burn pot airports • Inspected and tested the ignitor • Cleaned the glass • Inspected the rope seal around the window • Cleared the flue trap • Cleaned the flue pipe from soot • Inspected the flue assembly • Inspected the flue cap • Inspected the ash pan rope seal • Turned the unit on and tested the performance • Balanced out the fuel to air mixture • Made sure all fun