Came out on 3 system maintenance today Checked pressures checked duct work checked insulation levels cleared drains checked electrical connections checked contactors checked run capacitors checked Amp draws checked bearings checked blades checked filters checked disconnects Found. Bad 35/5 run cap Unit 1 condenser / replaced during visit. Unit 1 and 2 have furnaces that are not flush with evap coils and no transitions (will eventually cause more rust build up and leaks. (Customer states company should take care of 1 of the units) Unit 3 is very low on 410a (leak in evap coil) not in warranty. Very low/inadequate insulation levels. Unit 2 old 2004 lennox furnace has motor oil in cabinet signs of part failure. (Customer wants replaced with 2 stage heat ruud furnace and transition if needed from new furnace to evao coil done at time of installation.) No surge protection No IAQ (air purifier)
Came out on 3 system maintenance today Checked pressures checked duct work checked insulation levels cleared drains checked electrical connections checked contactors checked run capacitors checked Amp draws checked bearings checked blades checked filters checked disconnects Found. Bad 35/5 run cap Unit 1 condenser / replaced during visit. Unit 1 and 2 have furnaces that are not flush with evap coils and no transitions (will eventually cause more rust build up and leaks. (Customer states company should take care of 1 of the units) Unit 3 is very low on 410a (leak in evap coil) not in warranty. Very low/inadequate insulation levels. Unit 2 old 2004 lennox furnace has motor oil in cabinet signs of part failure. (Customer wants replaced with 2 stage heat ruud furnace and transition if needed from new furnace to evao coil done at time of installation.) No surge protection No IAQ (air purifier)
Came out on 3 system maintenance today Checked pressures checked duct work checked insulation levels cleared drains checked electrical connections checked contactors checked run capacitors checked Amp draws checked bearings checked blades checked filters checked disconnects Found. Bad 35/5 run cap Unit 1 condenser / replaced during visit. Unit 1 and 2 have furnaces that are not flush with evap coils and no transitions (will eventually cause more rust build up and leaks. (Customer states company should take care of 1 of the units) Unit 3 is very low on 410a (leak in evap coil) not in warranty. Very low/inadequate insulation levels. Unit 2 old 2004 lennox furnace has motor oil in cabinet signs of part failure. (Customer wants replaced with 2 stage heat ruud furnace and transition if needed from new furnace to evao coil done at time of installation.) No surge protection No IAQ (air purifier)
Came out on 3 system maintenance today Checked pressures checked duct work checked insulation levels cleared drains checked electrical connections checked contactors checked run capacitors checked Amp draws checked bearings checked blades checked filters checked disconnects Found. Bad 35/5 run cap Unit 1 condenser / replaced during visit. Unit 1 and 2 have furnaces that are not flush with evap coils and no transitions (will eventually cause more rust build up and leaks. (Customer states company should take care of 1 of the units) Unit 3 is very low on 410a (leak in evap coil) not in warranty. Very low/inadequate insulation levels. Unit 2 old 2004 lennox furnace has motor oil in cabinet signs of part failure. (Customer wants replaced with 2 stage heat ruud furnace and transition if needed from new furnace to evao coil done at time of installation.) No surge protection No IAQ (air purifier)