Recovered refrigerant from system. Removed dryer and txv. Installed new txv and brazed in new dryer. Pressure tested system with nitrogen, disconnected evaporator coil from furnace, hung new straps, moved evaporator coil over 8", built/installed transition between furnace and evaporator coil, taped of duct connections, leveled off unit, mastic sealed evaporator and furnace, pressure tested system with nitrogen, pulled vacuum on system, weighed in 410a refrigerant into system, reset unit, reconnected drain line to evaporator, ran system through cooling cycle and tested system. Unit is operational at this time.