Replaced the inducer motor for a Lennox furnace serial #5907H08537, M#G60UH-48C-110-07. Current inducer motor is seized. Complete system maintenance after the repair is complete. Customer takes care of his own filters. Collect quoted price of $1265. 10-7-22-PT- upon arrival I powered down the system and removed the access panels. I removed the flue from the top of the system then removed the inducer assembly. Upon removing the inducer I found a dead bird in it. I installed the inducer assembly, powered the system up and called for heat. I observed the system starting normally and run. I powered the system down and performed preventative maintenance. Removed and cleaned carbon off of the flame sensor, cleaned out the burners and burner box. Checked to ensure that the pressure switches were free of any debris. Checked all electrical connections to ensure that they are secure and in good condition. The air filter was replaced during the last visit on 10/3. Filter size 16x25x1. Powered th