Came out today for a no heat call on a Lennox furnace model #ML180UH090P36B-03, serial #5914F39720. Upon arrival the system was turned off at the thermostat. I called for heat and observed the system starting. The system started without any issues. I went back to the thermostat shut it down and after 5 minutes I called for heat again. The system again started without any issues. The blower motor amp draw is 4.8 and the inducer motor has an elevated amp draw. The inducer motor is rated for 1.2 and I’m receiving a reading of 1.13. I explained my findings to the homeowner and stated that the system is operating properly now. The only thing I could find was a high amp draw on the inducer. This could be an intermittent issue. The homeowner stated that he would like a quote for a new system and start fresh. I explained to the homeowner that I will collect any information I need and pass it on to chud’s comfort advisor. A comfort advisor will follow up with a proper quote for the homeowner. T