Install Halo LED whole house air purifier. Remove existing bypass humidifier and patch. Remove existing saddle valve by shutting off water and using a piece of 1/2” copper w/press coupling or use 1/2” sharkbite fitting in its place. If the saddle valve is not passing water then it can be abandoned. Please allow a full 2 hours for this scope of work. Chud will register new device which will give a 5 year warranty through the manufacturer. Chud will advise homeowner when cell replacement is needed. 11/28/22 CC Came out today to install a Reme halo uv light system and remove a bypass humidifier. Upon arrival powered the system down closed valve for water supply of humidifier. Removed the humidifier and bypass duct. Patched all holes using sheet metal, screws and aluminum tape. Installed new Reme halo uv light system on supply duct. Connected all the proper wiring and tested the system. Systems is operating properly at this time.