Furnace and ac was not operating upon arrival. After further diagnostics I and conversations with the customer I found that the blower motor was not running when it should be. I confirmed that the blower motor has failed with the manufacture. I then ran diagnostics on the ac and found that the motor booster and the motor starter are both testing out of the manufacture range. This means that these parts are closer to failing than they are to being good. Spoke with customer and highly recommended looking into replacement of the system instead of making any repairs, customer wanted to replace the blower motor for the time being. Once the motor was replaced I started the system up and ran further diagnostics, as of now everything is up and working.