In this estimate we will be adding earthquake straps and a 20 inch heater pan to the water heater in an outdoor closet. In order to do this will need to shut off the cold supply to the water heater shut the water heater off disconnect the gas as well as shutting the gas valve off. Once that is complete we can then install the pan and earthquake straps. The pan will need to have a three-quarter inch drip line that 90 down to the concrete ground. We will also need to reassemble the gas line put a 90 going down with a T and dirt leg to bring the gas line up to code. We will installed new gas flex and gas shut off valve. Also the water heater is going to need a three-quarter inch brass assembly for an expansion tank. As well as a T&P drain line. After putting the water heater back up plan and scan I was then able to fire up the water heater no problem the water heater seems to be functioning properly customer is very happy and satisfied with the job performed.