Arrived today to replace outdoor unit under warranty upon arrival recovered 5.5lbs of 410A then unwired low & high voltage then removed malfunctioning equipment then installed new equipment reconnecting low & high voltage along with replacing filter drier.Once parts were installed performed a pressure test with nitrogen placing 621psi within equipment confirming it was able to hold pressure successfully indicating there isn’t a leak present.Next pulled a vacuum down to 500 microns then tested operation of equipment confirming it was properly operating checked blower amps, fan amps, compressor amps, capacitor & refrigerant levels confirming all to be in specifications equipment is cooling properly again at this time.Customer would like us to return in warmer weather to confirm charge is proper to prevent any malfunctions.