Water softener install: Arrived to the customers home. Customer was aware of what was going to be done today. Started by draining and cutting out the well tank. Then, I cut the old water softener system. Customer says they wanted the Uv light filter combo, but I was not informed. Told the customer I would have to come back tomorrow morning to do that. Started piping the well tank. Hooked the electric back to the well tank. Installed a ball valve and checked for leaks. Put the resin and brine tank in place. Piped in the water lines to the softener in copper. Install another ball valve after the softener. Piped into 3 inch PVC wye into the 3†Abs. Piped in a 2 inch trap. Piped in the backwash line. Will have to come back tomorrow to install the air gap. Added salt to the brine tank. Plugged in the softener. Programmed the softener. Made the softener regenerate and backwash cycle. Checked for leaks. Customer is ok with us coming back tomorrow to finish the rest of the project. Will brin