Jake Kring. 10-08-24. I arrived for a blue club customer summer tune up. I first spoke with the homeowner and we discussed the airflow to one half of her home and that the duct work we installed corrected that. We cycled the system on in cooling and checked the air flow and found the system to be moving air well. I then inspect the filter and found that there was a duct board wedge that was letting the filter set in place and filter air through the filter. I removed the duct board wedge and taped and sealed the area where the filter sits. I made sure the filter seals properly and will not fall through the filter housing. I then inspected the system and found the furnace heat kit to be newer and have been replaced and the blower motor bearings to be exposed. The end of the motor cap had fallen off causing the bearings to dry out. I informed the homeowner of this and explained that the system is running and the motor is running properly at this time but I expect the blower motor bearings