I arrived for a silver member fall tune up. I spoke with the homeowner and found that they have a air handler and a heatpump. I first inspected the air handler and tested all heat strips. I forgot the system to be working properly in emergency heat mode. I then cycled the system in heatpump mode and checked the block wheel, amp draw and the condensers compressor and fan motor amp draw. I found the compressor max load amps to be running at 20.3 amps and it is not to run more than 21.9 max load amps. This system already has a hart start kit and the 40 MFD capacitor is within range of manufacture specifications. It was raining at the time so I placed the condenser cover on the outdoor system and did not check the systems refrigerant charge because I can’t get a accurate reading on the pressures with a wet system. I did find a lot of growth in the indoor system and made the homeowner as of this. I recommended to install a UV light and to clean the indoor system. The homeowner wants to clea