Nick was polite and did a great job. I appreciated his professionalism. I would certainly use Nick again
Jason was very thorough and answered all of my questions.
Phil showed curiosity and professional on the job!
Jason and Earl performed a professional installation job of my new American Standard Air handler and condenser unit!!! They both explain what each items did and how to operate. Thank you very much for outstanding job!!! Very pleased 😃!!!
Jason and Earl were very professional about the installation and knowledgeable of the equipment!!!
Jason and Earl did a professional installation job plus very thorough about explaining how the unit runs!!!
We have used Kings Electric several times and it always found them to be very professional and knowledgeable. We have just ask them to come and replace a GFI receptacle. We were quoted $275 to replace the existing GFI receptacle. We felt this was an unreasonable amount of money to just replace an existing GFI receptacle. After questioning the cost, they reduced it to $225 which was still an unreasonable amount. We gave in, and the box was replaced within 5 to 10 minutes. Unfortunately, we will have to seriously consider using Kings Electric again because their prices are too high and will have to get quotes from additional companies.
Kings Electric has always been a great experience, I feel I can trust this company. Also Emily who works in the office is excellent, love the positive attitude.
From the quote to the actual work, Nick was very professional and courteous. The work areas were cleaned up before he left, and everything was done in a very timely manner. I would have Nick back for future electrical work based on our experience with him.
The electrical problem was located and fixed quickly, great service
1)â€”â€”Install hardwired whip into water heater. 2)â€”â€”Install 30 amp breaker at panel.
1)â€”â€”Remove 50 amp 3 pole breaker. 2)â€”â€”Supply and install 70 amp 3 pole square d qo breaker.
1)â€”â€”Assemble and Install 2 customer supplied porch lights.
Replace (1) 20 200 single pole breaker Total amount will be credited back toward panel replacement within 6 months
Remove and discard indoor and outdoor Federal Pacific panels Supply and install (1) 200 main breaker outdoor panel Supply and install (1) 200 main lug indoor panel Upgrade grounding system up to code Permit fee will be an additional $500.00 if customer requests
1)â€”â€”Remove 200 amp meter can/riser and 200 amp fused disconnect. 2)â€”â€”Install new 200 amp meter can and 2 inch rigid riser with new weather head and #2/0 gauge copper feeders. 3)â€”â€”Install new 200 amp outdoor 8/16 circuit main breaker panel. 4)â€”â€”Reroute AC circuit and sprinkler circuit into new outdoor main breaker circuit panel. 5)â€”â€”Install whole house surge protector. 6)â€”â€”UPDATE GROUNDING; install 2 new ground rods, 1 water pipe ground and 1 low voltage ground bridge interconnected with #4 gauge bare copper wire. 7)â€”â€”Run new #2/0 gauge copper feeders between main breaker panel and indoor house panel. 8)â€”â€”Remove indoor 200 amp circuit panel. 9)â€”â€”Install new 200 amp indoor 20/40 circuit main lug panel. 10)â€”â€”Label, rough patch and clean. 11)â€”-Supply and install 3 smoke detectors. 12)â€”-Pull permit and get inspection.
1)â€”â€”Remove and replace all devices at eye level in home using decora style devices and cover plates.(30 devices includes, dimmers, toggle switches, receptacles and GFIs)
Remove and discard existing equipment Supply and install (1) 2 ton AC high efficiency split system with 10 years warranty from manufacturer and 1 year warranty from Kings Need crane to bring condenser to the roof $500.00 Permit fee will be passed through customer if needed
Clean drain line
1)â€”â€”Remove 2 outdoor 150 amp main breaker disconnects. 2)â€”â€”Install 2 new outdoor 200 amp 8/16 circuit main breaker panels. 3)â€”â€”Install 2 whole home surge protectors. 4)â€”â€”Remove aluminum feeders throughout both services. 5)â€”â€”Run new #2/0 gauge copper feeders to unit 1(approximately 100ft*3=300ft of wire) and to unit 2(approximately 30ft*3=90ft of wire). 6)â€”â€”Remove 2 150 amp indoor main lug circuit panels. 7)â€”â€”Install new 200 amp 20/40 circuit indoor main lug panel in unit 1 and 2. 8)â€”â€”Label, rough patch and clean area.
Repair door frame
1)â€”â€”Remove and replace 60 amp 3 phase heavy duty non fused AC disconnect. 2)â€”â€”Remove and replace 60 amp 3 phase square D breaker. 3)â€”â€”Run new whip from junction box at unit to new disconnect and repair junction box.
Relocate washer water valves
1)â€”â€”Remove and replace 8 customer supplied outlets and cover plates. 2)â€”â€”Supply and install 4 prong dryer outlet. 3)â€”â€”Install customer supplied light fixture.