During my inspection today, the customer greeted me at the front door. They allowed me to come inside and they showed me around all the equipment. They showed me the air filter. They were 14 x 20 14x24. They then showed me the thermostats. They were Honeywellprogrammable. They then showed me the indoor units and the outdoor units . (Attic) I got started by turning the system off at the thermostat and made my way to the air handler. I inspected multiple different components on the system, including the blower wheel/motor, evaporator coil, drain line (flushed drain line with a gallon of hot water and white vinegar), ductwork, electrical connections/components, etc. I checked all of these components for proper operation and cleanliness. As well as to make sure that nothing was damaged. I made my way to the outdoor unit. On the outdoor unit I inspected multiple different components as well, including electrical connections/components, Condenser fan motor, Compressor, Motor amp draws, R