Arrive to the home knocked on the front door and customer greeted me at the front door. Customer stated that the system was blowing proper airflow but that the outdoor unit fan was not cutting on. Customer has stated that he had been getting it to kick on by bumping it with a screwdriver through the top of the unit and it was working for a while but then it eventually failed. I then asked to see where the indoor and outdoor units were located. Indoor unit Took an amp draw of indoor fan motor of 1.13 which is in range per manufacture specs. Examine indoor evaporator coil and blower wheel both are clean and free of debris at this time. Examined easy trap condensate drain and is clean and free of debris at this time. Check all high and level just wiring and is in good shape at this time. Examined ductwork and is in good shape of this time. Outdoor unit Arrived at outdoor unit and found that the contactor was pulled in but the system was not running. I didn’t check the 35/5 capacito