Arrived at customers residence and was greeted by customer and led to the thermostat and put it in heat mode at this time and thermostat is functioning properly at this time. Inspected refrigerant lines and they are tight and neat and Arma flex insulation is intact and without any visible defects at this time. Inspected tape and duct work joints and they are tight and neat at this time. Unit is sitting horizontally level on 4x4 blocks at this time. Inspected drip pan under airhandler and it is dry and without any visible defects at this time. Inspected condensate drain and it is clear at this time. Inspected EZ Trap safety switch and it is functioning properly at this time. Inspected float safety switch on drip pan pan and it is functioning properly at this time. Inspected 25 and t0 amp circuit breakers and they are functioning properly at this time. Inspected blower motor and wheel and they are clean at this time and blower motor has an amp draw of .7 amps in low stage at this time.