. Upon arrival filters were clean. Went to attic air handler. The coil is clean. No sign of rust or leaks. The blower is clean. The blower motor amped within the manufacture specifications. No signs of oil on the motor. The drain is clear. The aux heat is working properly and amped at 20.17 and 20.90. Both are within the manufacture specifications. Inspected low and high voltage wiring. All wiring and wiring connections are good and tight. None found damaged. Went to outdoor unit. The Refrigerant pressures were spot on. The compressor amped at 9.32. The fan motor is spinning freely and amped at .57. Both are within the range per manufacture specifications. The capacitor checked out in range. The contactor is clean and free of pitting. Inspected wiring on outdoor unit. All wiring is good and tight. None found damaged. The condenser coil is clean and free of debris. Tested defrost and it is working properly. Basement. Pulled and cleaned flame sensor. Reinstalled flame sensor. The indu