Fall pm on 01/10/20 On arrival I sanded the flame rectification probe and checked burner arrangement the ignitor homes out to be in good condition checked all other electrical connections set unit #1&2 to call for heat measured supply and return air temp measured voltage and amps inspected electrical connections checked drain cleaned checked filter and replaced checked blower motor checked all other electrical connections checked temp rise unit #1 DT 70.5 degrees made for 45 to 75 unit #2 DT 60.7 temp rise made 40 to 70 degrees to unit tested unit operating normal at this time checked unit #3 heat pump set unit to call for heat measured supply and return air temp measured voltage and amps inspected electrical connections checked drain cleaned checked air filter checked blower motor checked coil checked condenser unit outdoor checked electrical connections checked voltage and amps checked compressor capacitor checked all other electrical connections checked pressure and temp unit has