Fall pm on 12/31/ 19 On arrival For Unit #1 I sanded the flame rectification probe and checked burner arrangement the ignitor homes out to be in good condition checked all other electrical connections set unit to call for heat measured supply and return air temp measured voltage and amps inspected electrical connections checked drain checked filter and checked blower motor checked all other electrical connections checked temp rise DT 39.8 made for 35-65 unit tested unit operating normal at this time. Unit #2 set the unit to call for heat measured supply and return air temp measured voltage and amps inspected electrical connections checked drain checked air filter and replaced checked coil checked blower motor also checked condenser unit outdoor checked electrical connections checked compressor capacitor checked voltage and amps measured pressure and temp and they are ideal indicating zero leaks checked all other electrical connections unit tested unit operating normal at this time. Hi