Installed new 90% modulating Furnace, evaporator coil, and inverter condenser. We set furnace on a new box and installed an April air 1510 filter rack. We updated the gas line by adding a drip leg. We installed a plug/switch combo. Make sure that the furnace and coil head slope and ran new drains. We installed a new air scrubber in the supply. We installed an ecobee thermostat. We did not need to set gas pressures because the gas valve sets it for itself. On the outside we set the condenser on a new pad and leveled it with gravel. We flush the line set with RX 11. We pressure tested the system at 400 psi and then vacuum down the system down to 500 µm both tests were good and the system has no leaks. We kept the old disconnect box but ran a new AC web with a 30 amp breaker to protect the system. We weighed in the charge based on the amount of wine set there was. Both heating and cooling functions works properly while testing it on the ecobee thermostat. We were able to help the custome