Everyone we worked with at Dickerson was very customer focused and accommodating.
Overall Experience
Quality
Price
Convenience
Repaired existing vinyl fence at residential property that had cracked during extreme temperature fluctuations. Replaced damaged sections and installed expansion joints every 50 feet to prevent future issues. Adjusted post spacing to accommodate material movement. Cleaned full fence line with non-abrasive cleaner to remove algae buildup.
Installed decorative aluminum fencing around residential pool area today. Project required precise measuring to follow property's slope while maintaining code-compliant 54" height. Used self-closing, self-latching gate mechanism with key lock. All posts secured in 10" diameter concrete footings extending below frost line for maximum stability.
I installed a 4-foot chain link fence for a residential property in Pittsboro, NC. I used galvanized steel posts, tension bands, and a fence stretcher to ensure a tight fit. After setting the posts in concrete, I secured the mesh.
In Pittsboro, NC, I repaired a damaged wood fence by replacing three warped panels and securing loose pickets with galvanized screws. I used a cordless drill and a pry bar to remove the old wood and realigned the sections with a level. The job also required applying wood preservative to prevent future rot. The result was a sturdy, well-aligned fence that looked as good as new.
I completed the installation of a 6-foot aluminum fence in Pittsboro, NC. I used powder-coated aluminum panels and stainless steel fasteners. The posts were anchored with quick-set concrete, and I double-checked alignment with a laser level before securing the horizontal rails. This type of fencing offers long-term durability and minimal maintenance.
Today, I installed an ornamental iron fence at a commercial property in Pittsboro, NC. The job involved setting 8 posts in concrete at 6-foot intervals and attaching pre-fabricated wrought iron panels using heavy-duty mounting brackets. I used a hammer drill to create precise holes for anchoring in the concrete base. To ensure an even height across the fence line, I used a string line and checked each panel with a level. After installation, I inspected the finish and touched up minor scratches with black rust-resistant paint for a seamless look.
In Pittsboro, NC, I installed a vinyl privacy fence using 8-foot white panels. Each post was secured with concrete mix, and I used a post hole digger to ensure uniform depth. The panels were locked in place with interlocking rails, providing a clean, modern finish.
I provided maintenance for an existing vinyl fence in Pittsboro, NC. This included tightening loose panels and cleaning the surface with a mild detergent and a pressure washer set at low pressure to avoid damage. I also inspected all post caps and replaced two that were missing. Using stainless steel brackets, I secured areas where wind had caused slight shifting. The fence looked refreshed and was once again structurally sound.
New 5' high black 2x4 welded wire fence with pressure treated 2x4 top rail and 4x4 post.
Installed new 16' wide black farm gate with 2x4 wire attached to secure driveway.
Installed new 6' high black vinyl chain link fence around playground.