completed a service call for a fire pump inspection at a commercial building. During the initial test run, I noticed the pump was not reaching the required pressure levels, which could compromise the building’s fire protection system. After a thorough inspection, I found that the issue was due to a clogged suction strainer, which was restricting water flow to the pump. I shut down the system, cleaned out the strainer, and checked for any additional obstructions in the intake line. Once cleared, I restarted the pump and performed another test, confirming that it was now delivering proper pressure and flow. The system is fully operational, and I provided the client with a service report and maintenance recommendations to prevent future issues.