-disconnect main water line from well head -cut pvc main going in ground and adapt to pex -at well head barb fitting transition to pex -install 1x3/4x1 tee and tie in hose bib -remove dry wall on back side of bathroom sink and replace both hot and cold angle stops on gray poly Return to perform quoted work Cut out black poly at well head and transition to pex installed 3/4 pex tee to tie in hose bib after installed I went inside home and replaced both hot and cold angle stops customer removed sheet rock beside washing machine so I could cut poly pipe and transition to pex and replace half inch 90 going though wall to angle stop after all work was completed turned water back on and breaker everything is now working properly with no leaks