-replace half horsepower sump pump at lift station for septic tank -replace float switch -1 year can’t write a check warranty Upon arrival to the home the homeowner made me aware of the location of the sewer ejection pump. I then proceeded to pull the old pump out of the Pumpstation and disconnect the old float switch and wires. I then proceeded to Disconnect the standpipe. Once the standpipe was disconnected I cut the end of it off and replaced it with a new 2 inch threaded adapter. I then ran the wires for the new pump and placed the float switch where it goes. Once I had everything installed properly I tested everything thoroughly to make sure that it was working properly. I also installed two new riser lids above the septic tank lids. I screwed the lids down to make sure that they were on there correctly.