8/17/23 Sean- Arrived on site, and spoke with manager about the issue with the slicer. Table guide moves and does not hold stable. Found that it is missing the shaft that locks it into place. Also noticed that 2 out of 4 legs are rigged with bolts. Slicer is very unstable. Will order all required parts and return. Returned on, 8/25/23- Arrived and made way to 2 nd floor after checking the lower level kitchen for any other repairs and none needed. Disassemble and flipped the sliced on end and installed the new shaft and the 2 feet. Tighten all down. Lubed the shafts. Flipped on its feet and installed the table. Power on and tested and it’s running smooth. Customer sliced a tomato and said it’s working better than before . Unit is now back in service and mov completed. No other repairs needed on kitchen per customer