Arrived on, Apw four bank hot well, second from left well drawing 6amps rather that the 4.5 amps it should. Will return with new element. Advised staff not to use this well. The other three wells are heating it properly. Returned on, 9/13/23 Dan Checked in with Emily the director. She gave me the go ahead to replace the element. Shut off breaker. Removed cover panel. Accessed defective element #3 from the left. Disconnected wiring and removed element. Installed, wired in, remounted element pan. Powered on to test. Measured 4.4 amps being drawn. Reinstalled cover panel. Allowed steam table to heat to a period to make sure breaker wouldn’t trip. Breaker never tripped and well satisfied. Job complete all four wells are heating at This time.