AC repair: Upon arrival, I found that the unit was freezing up. I diagnosed the issue as a low refrigerant charge and refilled the refrigerant. AC is now working well.
I was called to a home to replace two parts in an HVAC system. The first part was a capacitor, which was causing the system to not cool. The second part was a fan motor, which was not turning on. After replacing the parts, the system was cooling properly again.
I installed a new Amana 3-ton 14 seer heat pump.
I recently completed a job estimating the cost of a full new construction of ductwork and heatpump system.
I found a bad hvac compassor and recommended the customer replace the system or replace the compassor.
During a service call for a Rheem Classic Series, the AC was completely unresponsive. I checked the electrical panel and found the system's breaker had tripped. After resetting the breaker, the unit still wouldn’t start, so I inspected the thermostat and found a faulty wiring connection. I repaired the wiring using wire nuts and re-secured the connections. After restoring power, the unit started but was still low on refrigerant. I recharged the system with R410A to proper specifications, restoring full cooling functionality to the Rheem Classic Series.
Here is a post for you to rewrite. Please make it 60 words and in the voice of an electrician but not in a chatty tone-informational tone only. Please also use technical details that electricians would use to describe what you did. Please write something different than you have written before. Thank you! Post:
Performed a comprehensive repair on a Lennox Signature HVAC system, identifying a malfunctioning blower motor as the root cause of reduced airflow. After replacing the motor and verifying the system settings, I conducted a thorough cleaning of the air filters and checked refrigerant levels to ensure optimal cooling efficiency. The system's functionality was fully restored, enhancing indoor comfort and energy efficiency.
Client interested in HVAC installation for older building. Went out to the property and gave HVAC retrofit estimate. Client was pleased with the estimate and decided to go forward and schedule service.
Home AC repair - not producing any cool air. Found the blower wheel was malfunctioning and performed a replacement. Also cleaned condenser coil and replaced dirty filters. There is now cool air again and the air conditioner is running as it should.