Service Call: Commercial Hoist Issue: The hoist goes up so far then it starts making grinding noises and shakes. Work Completed: The technician replaced the fitting that was leaking, topped up the hydraulic fluid and cycled the hoist to ensure safe and proper function.
Service Call: Commercial Overhead Door Issue: The door will not open more than 2 feet then closes again. Work Completed: The technician put the cables back on the door as it was hit causing them to come off. The technician changed the damaged slide lock, lubricated all moving components on the door and cycled multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The door will not open, it is extremely heavy. Work Completed: The technician found that the cables have come off the door and he reset them, adjusted the tension on the door and lubricated all moving components on the door. The technician cycled the door multiple times for safe and proper operation.
Service Call: Dock Leveller Issue: Found the welds have let go causing the dock not to operate properly. Work Completed: The technician had to weld the steel back on the wall, lubricated all moving components on the dock and cycled the dock multiple times for safe and proper operation.
Service Call: Commercial Roll-up Grill Issue: The grill is not working properly, it is coming down too far. Work completed: The technician adjusted the limits on the grill and tested for safe and proper operation.
Service Call: Commercial Dock leveller Issue: There is fluid leaking everywhere. Work performed: Technician replaced the relief valve, secured the power pack and topped up the hydraulic fluid. The technician cycled the dock multiple times to make sure the leak was fixed and everything was running safe and properly.
Service Call Work Performed: -Supply and install new bottom bar -Supply and install new flat retainer with 4" u rubber and 1/2" gum rubber 10' -Supply and install new mosley air switch -Supply and install new curly cord -Removed damaged weather strip. -Installed new clip on weather strip.
