Service Call: Pedestrian Door Issue: The door is not closing, when someone walks up to it, it opens and stays open. Work Completed: The technician replaced the faulty circuit board and the inside motion detector. The technician tested the door for safe and proper operation.
Service Call : Commercial Overhead Door Issue: The door will no longer lock someone hit it. Work completed: The technician replaced the damaged slide lock, replaced the worn pull rope, adjusted the tension, lubricated all moving components and cycled it multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The door is stuck and seems to be an issue with chain or pulley system. Work Completed: The technician found everything to be tangled so he untangled it and got the chain hoist back to working condition. It looks like it was not used properly causing it to malfunction and the safety to be triggered. One everything was put back together the technician cycled it multiple times for safe and proper operation and taught the staff how to properly operate the system.
Service Call: Commercial Overhead Door Issue: The garage door is broken (South door). Believe the problem is the door photo eyes, the door is currently running in manual mode. Please have someone look into this matter. Work Completed: The technician found the photo eye and bracket has been hit, so he replaced them both. The technician lubricated all moving components on the door and cycled it multiple times for safe and proper operation.
Service Call: Automatic Entry Door Issue: The door sounds like it is trying to open but it doesn't move. Work Completed: The technician put the door back onto the track as it appears to have been hit, replaced the J arm, lubricated all moving components and tested it for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The spring is broken and needs to be replaced. Work Completed: The technicians replaced the spring assembly, adjusted the tension, adjusted the limits and lubricated all moving components on the door. The technicians cycled the door multiple times for safe and proper operation.
Service Call: Commercial overhead Door Issue: The door will not open and it seems to have no power. Work Completed: The technician replaced the faulty Bircher switch, lubricated all moving components on the door and cycled it multiple times for safe and proper operation.
Service Call: Commercial Dock Leveller Issue: The dock is not working, there seems to be no power. Work Completed: The technician reset the overload, checked and found there was a small leak, tightened the bolt and topped up the fluid that was 3L low. The technician lubricated all moving components and tested the dock multiple times for safe and proper operations.
Service Call: Automatic Entrance Gate Issue: Entrance Gate is not automatically closing after a car passes through. Work Completed: The technician found the chain was seize, he lubricated all moving components and topped up all the fluid for the gate. The technician cycled the door multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The cables have snapped Work Completed: The technician replaced the broken cables, replaced two broken springs and three # 2 Hinges. The technician lubricated all moving components on the door and tested multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The operator has stopped working and the door is stuck closed. Work Completed: The technician realigned the photo eyes and reattached the track that was loosen when the door was hit. The technician lubricated all moving components on the door and tested multiple time to ensure safe and proper operation.
Service Call: Commercial Overhead Door Issue: The door will not close, a truck backed into it. The technician replaced the track that was bent, the roller and the hinges. The technician balanced the door and tested multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The door is extremely heavy Work Performed: Replace 2 broken springs, and 2 hinges. Tested door multiple times for safe and proper operation.
Service Call: Commercial Hoist Issue: When the button released to control hoist, the hoist is not responding to it, and keeps going down. Work performed: Removed protective cover from unit and inspected, Tested hoist multiple times to find out the problem, the solenoid is sticking causing hoist to continue to lower when the down button is released. Replaced solenoid then tested multiple times for safe and proper operation.
