Service Call: Commercial Fire Door Issue: Fire door will not stay up. Work to be completed: The technician reset fire mechanism and tested the door multiple times for safe and proper operation.
Service Call: Residential Garage Door Issue: The spring is broken laying on the ground after it made a loud banging noise. Work Completed: Technician replaced the broken spring, lubricated all moving components on the door and tested the door multiple times for safe and proper operation.
Emergency Service Call: Commercial overhead Door Issue: Door was hit by an Emergency vehicle Work completed: Technicians called to an emergency service call in the evening, technicians removed the door panels, had the customer drive the truck forward to clear the way of the door. The technicians re-installed the door panels, took measurements, aligned the door, took pictures of the parts needed and secured the door for the evening. Technicians will return to site with the materials needed to fix the door in the morning.
Service Call: Commercial overhead door Issue: Bearing for spring broken Work performed: Moved the spring and plate over to a fresh piece of wood. Levelled shaft and screwed it back into the wall. Added tension to spring to check it. Balanced the door for smoother operation and to put less stress on the Zap drive. Reset the limits and lubricated all components of the door. Tested multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: Door is Crooked, and off the the track. Work Performed:Installed new bracket, realigned the door. Tested several times for safe and proper operation.
Service Call: Residential Garage Door Issue: Door will not open Work Performed: Reset cable's as they had fallen off the drum Adjusted spring tension Tested door for safe and proper operation
Service Call: Overhead Door Issue: Door will not close Work Performed: Adjusted Photo Eyes, Tested door for safe operation
Service Call: Work performed: Install 8500 operator complete lock, light, photo eyes and inside push button Operate and test Check operation
Service Call: Work Performed: Arrived on site, hand chain disconnect was pulled. Released disconnect. Test door for safe and proper operation.
Service Call: Work Performed: Installed safety Bottom Edge
Service Call Work Performed: Tighten V belt with manual chain Adjust force and sensitivity settings The belt and settings are near maxed out Operator is currently working, however it’s recommend to replace with new Operator