Service Call: Commercial Overhead Door Issue: The door is not working at all and is stuck in the up position. Work completed: The technician Cut back the hose and glued back in place, adjusted bircher switch and cycled the door multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The door is coming out of the frame Work Completed: The technician removed the operator and reinstalled it complete with new mounting brackets and hardware. The technician Installed new weather seal on the bottom of the door to prevent water from coming inside, Lubricated all moving components on the door and cycled it multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The door was struggling now and was slamming down, then stopped working all together. Work Completed: The technician changed the broken spring, replaced the damaged cables, reset the limits and adjusted the photo eyes. The technician lubricated all moving components on the door and cycled it multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The cables have come off the door. Work Completed: The technician replaced the cables back on the drum and adjusted the limits on the door. The technician lubricated all moving components on the door and cycled the door multiple times for safe and proper operation.
Service Call: Commercial overhead door Issue: The door will not stay up, it comes creeping back down. Work completed: The technician added tension to the door and lubricated all moving components on the door. The technician cycled the door multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The cables on the door are extremely loose and the door is hard to close. Work Performed: Technician noted that the door had been hit and is binding on header. Technician put the cables back onto the drum, re-welded two bumpers back onto steel jamb and painted welds. Lubricated all moving components on the door, and cycled multiple times to ensure safe and proper operation.
Service Call: Gym divider folding door Issue: Limits are off and need to be adjusted Work Performed: Reset limits Tested door for safe and proper operation
Service Call: Overhead door Issue: Sensor is not working. Work Performed: Realign and tighten photo eye Operate and test
Service Call: Work performed: Removed tensions from springs and brought old shaft down. Installed new shaft and bearings. Put new shaft and spring assembly up. Installed new spreader bar and lock collars. Cycled door and tested for safe operation.
Service Call: Work performed: Install new bottom safety edge complete with battery Wire Reset limits Operate and test multiple times Check operation