546 Bryne Drive Unit D
Barrie, ON L4N 9P6
8884410008

Local Reviews
for orillia, on


Job Locations
for orillia, on

Ashley O.

Ashley O. Job Checkin

Service Call: Work Performed: Install 2 hinges on entrance gate Cut out old ones and weld in new hinges Prime and paint hinges Test operation


Ashley O.

Ashley O. Job Checkin

Service Call: Work Performed: Re-anchor operator to the wall Recommend new light duty commercial operator Hollow Tube Shaft 1" - 12ft


Ashley O.

Ashley O. Job Checkin

Service Call Work Performed: Found that inherent safety was getting set off on open and close Adjust force control Checked heater in unit and working fine Batteries are usually good for three years only Unit is from 2017, will have to be changed soon Lubed chain, rusted and not rolling smooth Checked all operation of the gate

Service Call

Work Performed:

Found that inherent safety was getting set off on open and close
Adjust force control 

Checked heater in unit and working fine

Batteries are usually good for three years only
Unit is from 2017, will have to be changed soon

Lubed chain, rusted and not rolling smooth 

Checked all operation of the gate

Ashley O.

Ashley O. Job Checkin

Service Call Work Performed: Looks like drum slipped, put the roller back in track Bring right side cable loose coming down Levelled door Test operation ok Need a piece of weatherstrip replaced, door damaged it

Service Call

Work Performed:
Looks like drum slipped, put the roller back in track
Bring right side cable loose coming down

Levelled door
Test operation ok

Need a piece of weatherstrip replaced, door damaged it

Ashley O.

Ashley O. Job Checkin

Service Call Work Performed: Found gate had been hit or pillar has moved Recommend fabrication of adjustment plate mounted to pillar with epoxy And bolted to catch post


Ashley O.

Ashley O. Job Checkin

Service Call Work Preformed: Reset limits and adjust pusher springs on 4 doors Operate and test to ensure over head door is working properly after work preformed Check operation


Ashley O.

Ashley O. Job Checkin

Service Call Work Performed: Reset I control pulse over head door operator Operate and test multiple times If problem happens again pulse will need to be updated through I controls Tighten all hinges while onsite Lube and adjust Check operation

Service Call

Work Performed:
Reset I control pulse over head door operator 
Operate and test multiple times
If problem happens again pulse will need to be updated through I controls 
Tighten all hinges while onsite
Lube and adjust
Check operation