Service Call: Commercial Overhead Door Issue: The door is sticking when it opens and closes. Work Completed: The technician adjusted the guides, the drive chain, lubricated all moving components and cycled it for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The door will not close, it will start then opens right back up. work completed: The technician found the photo eyes to have been bumped cause the door not to close. The technician adjusted them, lubricated all moving components and cycled the door multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The emergency Stop has stopped working. Work Completed: The technician replaced some of the rubber around the door that was causing the sensor to go off. The technician lubricated all moving components on the door and cycled it multiple times for safe and proper operation.
Emergency Service Call: Commercial Exit Gate Issue: The gate is stuck open and will not close. Work Completed: The technician arrived onsite and had to weld on a new key stock, adjust the limits and cycled the gate multiple times for safe and proper operation.
Service Call: Commercial Entry Gate Issue: The gate is not opening or doing anything Work Completed: The technician adjusted the limits on the gate and replaced the broken hinge. The technician topped up all the oil, lubricated all moving components on the gate and cycled it multiple times for safe and proper operation.
Service Call : Commercial Overhead Door Issue: The Spring is broken and needs to be repaired Work Completed: The technician replaced the broken spring, replaced a roller, straightened out the track and adjusted the limits. The technician lubricated all moving components on the door and tested the door multiple times for safe and proper operation.
Service Call: Automatic Gate Issue: The gate is stuck open, it will not close. Work completed: The technician had to install a new key stock, topped up all the fluid and cycled the gate multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: The door is jammed and will not move, it is stuck half open. Work Completed: The technician found that the photo eye reflector is no longer reflective, so they replaced reflector with a new one, made adjustments to the j-arm and ran a pair of new cables. The technician lubricated all moving components on the door and cycled the door multiple times for safe and proper operation.
Service Call: Commercial Entrance Gate Issue: The gate will not close Work Completed: The technician replaced the damaged wire in the push button station. The technician tested the gate multiple times to ensure safe and proper operation.
Service Call: Commercial Overhead Door Issue: The overhead doors are not functions as they normally do, they are extremely slow. Work completed: The technician went over the doors and lubricated all the moving parts on them, adjusted the limits, the tension and the photo eyes. The technician tested the door multiple times for safe and proper operation.
Service Call: Commercial Overhead Door Issue: Chain has come off mechanic bays door, the door is stuck open Work Performed: Reset hand chain Tested multiple times for safe operation
Service Call: Commercial Overhead door Issue: Wire is corroded on Photo-eyes, door isn't going all the way down Work Performed: Found photo eye to be faulty, Installed and aligned new photo eye. Test for safe and proper operation