Service Call: Commercial Automatic Entrance Gate Issue: The gate has just stopped working and its been stuck open for the past few days and needs to be closed. Work Completed: The technician Opened up the drive chain and sprocket gearbox at the back of unit and found a garbage bag jamming one of the sprockets. The technician removed the garbage bag, lubricated all moving components on the gate and cycled it multiple times for safe and proper operation.
Service Call: Automatic Entry Door Issue: It acts up intermittently, If the door is used 10 times, 9 times it opens and 1 time it doesn't and customer runs into the door. Work Completed: The technician replaced a roller, a sensor, lubricated all moving components and cycled the door for safe and proper operation.
Service Call: Residential Garage Door Issue: The door will barely move and it will not open. Work Completed: The technician replaced a broken spring, adjusted the limits and the tension on the door. The technician lubricated all moving components and cycled it multiple times for safe and proper operation.
Service Call: Residential Garage Door Issue: The door is hard to open and close and there is a loud grinding noise. Work completed: The technician replaced 2 rollers as they were seized and lubricated all moving components on the door. The technician cycled the door multiple times for safe and proper operation.
Service Call: Commercial overhead door Issue: The company would like 10 new remotes programmed Work completed: The technician supplied and programmed 10 remotes, lubricated all moving components on the door and cycled it multiple times for safe and proper operation.
Service Call: Residential Garage Door Issue: The door will not open more than 4 inches when you hit the button. Work Completed: The technician adjusted the photo eyes, reset the limits and reprogram the remotes. The technician lubricated all moving components on the door and cycled it multiple times for safe and proper operation.
Service Call: Commercial Dock Leveller Issue: There is a big gap when the dock goes down Work completed: The technician had to weld on new dock bumpers and lubricated all moving components. The technician cycled the dock multiple times to ensure safe and proper operation.
Emergency Service Call: Commercial Dock Leveller Issue: The dock leveller is stuck down so the overhead door will not close. Work completed: Technician unjammed the dock leveller from the trailer, adjusted the limits and topped up the hydraulic fluid. The technician cycled the dock to ensure it is in safe working condition.
Service Call: Commercial Overhead Door Issue: Door will not close, it is stuck open. Work Completed: Technician tightened all connections on the door and operator. The technician replaced 2 number 4 hinges snd lubricated all moving components on the door. Cycled the door multiple times for safe and proper operation.
Service Call: Commercial Car Wash Door Issue: Door will not close all the way. Work Performed: Replaced the photo eyes on the car wash door. Cycled door multiple times to check for safe and proper operation.
Service Call: Commercial Interior Door Issue: Door Not Locking Work performed: Removed knob set Inside seized , free up with lube and penetrate Reinstall knob set Replace missing screws in struck plate Test operation
Service Call: Commercial Car Wash Door Issue: Door Opens Very Slowly Work Performed: Canadoor Technician checked over system, all okay. Checked oil level and drained water. Checked operation. Verified that all operation is all okay.
Service Call: Residential Garage Door Issue: Broken Spring Work Performed: Remove and replace broken spring. Lube door Test for safe and proper operation
Service Call: Work Performed: Reset cables Replace damaged rollers and missing lag screws Lube and adjust where required Operate and test Check repeat operation
Service Call Work Performed: Arrived on site found broken cable. Replaced both cables. Test door for safe and proper operation