Upon arrival customer stated that their previous hvac technician claimed that the main floor systems flames were rolling out of the burner compartment and condemned the system. I found the main floor system in the garage area. I started system up in heat mode by jumping out the control board for a heat call. The draft inducing assembly started but has a lot of debris swirling around inside. However the next step in the heating start sequence is to light up the electronic igniter. It never lit. After further inspection i found that the igniter is broken down to the porcelain. All the graphite material is gone. My recommendation is to at least replace the Electronic Igniter. Then the system can be further inspected.