7077 Beach Dr SW
Ocean Isle Beach, NC 28469
9107542200

Local Reviews
for boiling spring lakes, nc


Job Locations
for boiling spring lakes, nc

Johnathon G.

Johnathon G. Job Checkin

Prepaid maintenance


Scott S.

Scott S. Job Checkin

One man one hour


Johnathon G.

Johnathon G. Job Checkin

To replace the filter dryer. Non warranty, braze in.


Johnathon G.

Johnathon G. Job Checkin

Prepaid maintenance


Josh P.

Josh P. Job Checkin

Install maintenance 1 of 1. 1 system: 2018


Johnathon G.

Johnathon G. Job Checkin

Service call/noise


Rick  .

Rick . Job Checkin

Installed a new Condenser fan motor for the police station back end unit. Started system. Compressor is struggling to turn over. Installed a start booster for the compressor. Restarted system. Compressor and motor have good run and start amps now. Finished checking over rest of system. Ok to send invoice to BSL per office. Invoice for fan motor has. Already been sent.


Rick  .

Rick . Job Checkin

Diagnostic call. Found power going to unit, contactor pulled in , power across contactor but condenser fan motor and compressor were not running. Cooled down compressor and start winding closed. Restarted system. Condenser fan motor is going bad. It had stopped running and made the compressor go off on internal overload, office is ordering a new 1/6 hp 815 rpm, .9 amp condenser fan motor. Condenser fan motor


Johnathon G.

Johnathon G. Job Checkin

Service call. Police department front office.


Scott S.

Scott S. Job Checkin

Replaced GFI outlet


David W.

David W. Job Checkin

Return with parts


David W.

David W. Job Checkin

Service call


David W.

David W. Job Checkin

Top off 1 unit with 1lb R-22 now that I have the Refrigerant in stock


David W.

David W. Job Checkin

Drain Clog & filled drain pan & Slightly low on R-22 but we do not carry R-22 any longer


A+ T.

A+ T. Job Checkin

Service Call: Found System substantially low on refrigerant, Preformed level 1 leak search & found refrigerant leak in liquid & vapor line Schrader valves. Replace both valves (warranty parts) & acid clean debris from condenser coil, re insulate txv sensing bulb at evaporator coil. Weighed in 5lbs R-410a refrigerant & Verified sub cooling. No further issues found, system cooling efficiently. INSTALLED 2015