Came to a no cool callsubcooling was a little low and temp split was low, added one lb of 410a, got subcooling up and now temp split is 19, will take a bit to bring temp down in the shop, blowing 62 degrees with return temp of 82
Dispatch for a no cool. New customer. Spoke with Toby and he described what was happening in the home. I found the run capacitor dead. Removed and replaced with new turbo 200 X. Condenser coils were impacted with dirt and grass. Use my water hose to clean them off.
Upon arrival found mini split filters dirty no allowing for return air to defrost cassette cleaned and cleaned condenser, after cleaning system running very efficiently.
AC performance tuneup times due systems. Filters need to be changed before it reaches 90°. Inspect ductwork, drains, refrigerant levels. Check thermostats for proper operations. Wash condenser coils.
No heat. On arrival the system was turned on in heating mode but the air conditioner started running. The wiring was examined and the reversing valve was found to be wired to constant power causing the unit to run an air conditioning even with a call for heat. The wiring was changed in order to allow the thermostat to control the reversing valve. The system was then tested and both the heat pump and emergency heater are working at this time.
Dispatch to look at a unit that we looked at a couple of months ago. Arrived and added 2 lb of r410a. System is cooling properly at this time.
Arrived to find system working just lose wir. Wire was connected and system is running at this time. Pressured were emailed to customer who declined the maintenance. Coils dirty and systems overcharged heatpump which can be problematic. Maintenance is strongly recommended
Arrived to find system working just lose wir. Wire was connected and system is running at this time. Pressured were emailed to customer who declined the maintenance. Coils dirty and systems overcharged heatpump which can be problematic. Maintenance is strongly recommended
Arrived to find system working just lose wir. Wire was connected and system is running at this time. Pressured were emailed to customer who declined the maintenance. Coils dirty and systems overcharged heatpump which can be problematic. Maintenance is strongly recommended
Arrived to find system working just lose wir. Wire was connected and system is running at this time. Pressured were emailed to customer who declined the maintenance. Coils dirty and systems overcharged heatpump which can be problematic. Maintenance is strongly recommended