I recently completed a job installing a 3.5-ton attic installation heat pump for a customer. The customer was interested in a special size filter grille that was 20x30. I provided the customer with the necessary information and measurements to ensure that the grille would fit properly. I also installed the heat pump and made sure that it was working correctly before leaving the job site. The customer was very satisfied with the work that I performed and I am proud to have been able to help them with their home improvement project.
I recently completed a job installing a 3-ton package unit in a residential home. The unit was installed on a concrete slab and connected to the existing heating and cooling system. The installation process involved removing the old unit, installing the new unit, and connecting the electrical and refrigerant lines. I also performed a thorough inspection of the unit to ensure it was operating correctly.
I installed a 3.5 ton unit in the attic of a customer's home. The temperature in the upstairs dropped from 85 to 83 degrees, and the split is 20 degrees. I advised the customer that we will be back tomorrow to dial in the charge.
I recently completed a job for a client in Phoenix, Arizona. The job was a 4-ton closet installation. The client wanted to add a closet to their master bedroom and had a specific design in mind. I worked with the client to select the right closet design and materials and then installed the closet in the designated location. The installation process included cutting the walls, framing the closet, installing the doors, and installing the shelves and hanging rods. I also made sure that the closet was properly insulated and vented to ensure that it would be energy-efficient. The client was very pleased with the results and said that they were very happy with the work that I had done.
I am a highly skilled and experienced home service professional. I recently completed a roofpack installation for a client in the city. The roofpack is a specialized system that provides a waterproof barrier and insulation for roofs. It consists of a series of panels that are installed over the existing roof, creating a seamless and durable surface. The installation process began with a thorough inspection of the roof to assess its condition and determine the best location for the roofpack panels. Once the panels were installed, I ensured that they were properly sealed and fastened to the roof. I also made sure that the roofpack was installed according to the manufacturer's specifications and local building codes. The roofpack installation was a complex process that required a lot of skill and attention to detail. I worked closely with the client throughout the process, answering any questions they had and ensuring that they were satisfied with the results. In conclusion, roofpack in
I recently completed a 3-ton attic split installation for a customer in the city. The job involved removing the old furnace and installing a new high-efficiency unit. I also replaced the ductwork and insulated the attic to improve energy efficiency. The customer was very pleased with the results and expressed satisfaction with my work.
I was hired to install a 4-ton package unit in a residential home. The unit was located in the attic and had to be installed on a concrete slab. I started by removing the old unit and disposing of it properly. I then installed the new unit and connected the electrical and refrigerant lines. I also tested the unit to ensure it was working properly. I cleaned up the work area and made sure everything was in order before leaving the job site.
First Company Air Handler Only Installation
Ultimate *Customer requested to reuse old drain line. Stated she spoke to selling tech about it.