Completed L.P. Gas furnace and AC replacement. Disconnected and removed the old furnace and set new one on new blocks in its place. Reconnected the gas, electric, pvc venting and ductwork. Ran new drain line allowing the furnace and AC coil to drain to the floor drain location. Installed a new T6 programmable thermostat and connected it to the furnace. Recovered the old refrigerant and disconnected the old AC. Cody built up the ground under the AC location with sand and we set new pad there and placed new condenser on it. Flushed the existing line set then reconnected it to the new condenser and new coil mounted in the duct above the furnace. Pressure tested lineset with 500 psi nitrogen to check for leaks. Evacuated the lineset to 500 microns then released the new refrigerant charge. Ran the AC and performed a full start up procedure. Our office will contact you to schedule a time for one of our technicians to come and do a start up on the new furnace at your convenience. Thank you fo