Customer called for water leaking from duct work. Seemed to stop after customer turned the system off from what the customer told me. Upon inspection I found the thermopanning damp. As I opened up the panning I found no sign of current water leak. Following the staining on the ceiling of the basement led me to below the refrigerator which seemed to be the culprit. The refrigerator has some type of drain pan that must have over flowed at some point. Customer would like small section of thermopanning replaced that was damaged by the water. See pics for visual. Approximately 18”W x4’ L and a smaller piece 18”x18”. This is a small repair. Found no issues with heater or that the heater caused this issue. System is working properly at this time. ***this customer has another account in our ST system. Please add this to that main account***