Came out today to perform preventative maintenance for a comfort maker system. Model #N8MSN1352116A , serial #E203215031 . Upon arrival the system was off so I powered the system down and removed the access panels. The homeowner had a new thermostat recently put in and Honeywell had the homeowner add a jumper wire. I had some electrical issues due to my own fault. I was able to get the system back up and running. The evaporator coil’s are clean and in good condition. Tested the drain pain and drain line with several bottles of water to ensure that there are no leaks or clogs. I replaced the air filter size 24x24x1. Checked all electrical connections to ensure that they are secure and in good condition. I re attached the acces panels and powered the system up . I called for ac and observed the system starting normally. The condenser amp draws are .67 for the fan and 8.3 for the compressor. The temperature split is at a 18° differential. The system is operating properly at this time. Hom