Overall Experience
Quality
Price
Convenience
Greatly satisfying to know that everything is clean and it tip top shape.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Great work 👍
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Anthony did our yearly maintenance and went over everything he did with me. He always is willing to answer any questions I have.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Daniel was professional, informative, and provided honest advice. He came out to do routine maintenance, found some issues, and was able to fix them while he was here, allowing us to avoid an additional fee for having to make another service call. Thanks Daniel!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Above and beyond coming over at 7 the night before Thanksgiving. And a fairly easy fix. Thank you!
Overall Experience
Quality
Price
Convenience
Any questions I have on my Geo system Comfort Matters is alway ready to help and we have been working with them for over 10 years.
Overall Experience
Quality
Price
Convenience
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation.
Customer explained how heat pump was not cooling. Fuse was failed on furnace. Low voltage wiring looked to be in ok shape. Found the R wire on control board on heat pump, with missing insulation that was exposing the copper part of wire. It is possible that the wire had touched the metal cabinet causing system to blow fuse on furnace. I replaced fuse and repaired wire and then performed a tune up. AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Motor starter is very pitted. Checked ohms on it, it is in range at this time. If fuse fails again, replacing the low voltage wiring would be next. All other sensors and pressures switch wiring are fine. System is also low on refrigerant. Can’t guarantee that system will maintain temperature based on the issues found, system could also freeze up. Added 1pd of refrigerant. Factory charge is 10lbs. D
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Recommended EAC for a better air filtration and cleaner air, Blower wheel cleaning, locking caps to meet Minnesota code and Start assist kit to provide a boost in power when the ac starts up and help extend the life of the compressor. All recommendations has been declined as of now.
Furnace precision tune up; clean and tune up furnace; clean burners, test ignition components, adjust gas level, test safety circuit, check indoor motors, checked all electrical components, tested indoor air flow, checked heating temperatures, and tested overall furnace operation. Recommended a blower wheel cleaning, electronic air cleaner and humidifier. Installed EAC and tested operation. Blower wheel in furnace is dirty reducing air flow/efficiency, pulled and cleaned blower wheel. Reassemble and tested operation. Declined the humidifier at this time.
Moved venting termination away from lineset. Also need to order drain pan kit due to recall.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Recommend vent screens, new motor starter and start assist, pipe insulation and system replacement. All recommended options declined at this time.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Found the unit did not start up once homeowner had turned system on at thermostat. Found the system had proper low voltage going to the outdoor unit. Checked all switches and sensors to make sure there wasn’t an issue and found no discrepancies. Checked with tech support and they stated it was a faulty defrost control board. Also found the furnace filter was causing a high restriction in airflow, lastly noticed the motor starter was heavily damaged and could cause major issues to the system. All recommendations declined at this time. Chris a will meet with you September 1st at 4pm to go over system replacement.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation.
Arrived and ac was off. Heckled refigerant charge to best of my abilities with sc being dirty. It does look to be low. We would have to find leak and fix it if possible. Then clean and tune up to ensure proper charge is added. Customer will call back if they want the leak search done.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Customer paid for a new supply of eac filters. We will call the manufacture and get them specially made and mailed out.
Removed 50 gallon water heater that was manufactured for natural gas and installed a new 50 gallon water heater that uses propane. Tested for leaks. Set temperature to approximately 120 degrees. Adjusted gas pressure lower to water heater as it was over the maximum of 14” water column allowed per manufacturer. Drain pan is installed and piped to the floor drain.
AC precision tune up. Clean and tune up AC; cleaned condenser coil, checked all outdoor electrical components, tested indoor air flow, checked refrigerant levels, and tested overall AC operation. Blower wheel in furnace is dirty reducing air flow/efficiency, pulled and cleaned blower wheel. Reassemble and tested operation. Installed an electronic air cleaner and tested operation. Installed drain pan treatment. Also recommended a surge protector and rodent screens. This recommendations were declined at this time.
House flooded and was recently sold in June. Water damage happened, and water is also getting in the basement when it rains, and foundation is wet. Pools of water are seen on the floor. Water heater is not staying lit. I noticed lots of rust and moisture at the burner chamber, and it may be starting to leak. Existing water heater shows it is for natural gas, yet the home is on propane. Water heater MUST be replaced. I shut the gas off to the water heater. House is currently being completely renovated due to previous owner and water damage. Renter is living onsite in a camper. If we replace the water heater we will not warranty it due to any rust, leaking, or damage incurred due to water getting into the basement. Installing a drain pan underneath would help protect it. I found two replacement options for propane water heaters but they are not stocked locally and must be special ordered.
Return visit to remove and replace the ac drain pan. After drain pan was replaced I turned the system back on and tested operation. As of now everything is up and operating properly.