Arrived on site to diagnose unit not working again. Spoke to client and they stated unit just stopped blowing air. Cycled and I for was not operational. Condenser was operational and found line set and compressor frozen over. Advised issues is inside. Inspected electrical compartment and found secondary motor control for blower failed. Motor has a lot of oil that has been leaking from over working. Advised can fail in future. Put new part in and motor is operational just working hard from age and operation. Client also wanted to go over Ac recommendations. Advised primary stater was pitted on contact points from age and operation. Secondary motor control was replaced last time. Fan motor had dried up oil from past and can fail in future from over working. Compared is older and working hard. Recommend adding a compressor booster to help prevent hard start up. They are aware of what is going on and on ow it’s old. They stated they want to talk it over and see what is better side they