Customer stated unit was blowing warm air. But is was running, verified customer concerns. Inspected furnace found no fault codes and system was operating as it should. Had. Zero temperature split. Should see any where from 15 to 20. Inspected out door unit, found that after checking charge that the compressor was not running. Attempted to cool the compressor down with water. Then attempted to jump start it with a hard starter kit. Compressor is pulling over 200 amps when attempting to start, compressor is seized. Compressor is still under warranty, Will be installing compressor Wednesday. Total to be collected $1,750 Took 10% down today of $175